DC 5V-35V auf 1,25-30V 3A Stepdown

9,90 €
inkl. MwSt., zzgl. Versand
Auf Lager

Beschreibung

Eingang: 5V-35V
Ausgang: 1,25V-35V (per Poti regelbar)
Strom: Max. 3A (per Poti regelbar)

Eingang: 5V-35V
Ausgang: 1,25V-35V (per Poti regelbar)
Strom: Max. 3A (per Poti regelbar)

This module is adjustable 5-35V to 1.25-30V step-down module, using the LM2596 chip, can be easily up to 3A current, It is a very good constant current led driver.

Feature:

  • Modules nature: Non-isolated Buck, Constant Current, Constant Voltage
  • Rectification: Non-synchronous rectification
  • Input voltage: DC 5-35V
  • Output voltage: DC 1.25-30V, the Input voltage Must Higher 2V than output Voltage
  • Output current: 3A (Adjustable)
  • Power: If power greater than 10W, please install HEATSINK
  • Conversion efficiency: 92% (MAX)
  • Switching frequency: 150KHz
  • Output ripple: 50mV (max), 20M Bandwidth
  • Load regulation: ± 0.5%
  • Voltage regulation: ± 2.5%
  • Operating Temperature: -40 ° C to +85 ° C
  • Dimension: 48 x 23 x 14 mm

 

Some Applications:

  • Rechargeable lithium-ion battery:
  • Drive high power LEDs
  • Charging curve as shown below: red for the current, blue for voltage

Battery Charging method:

  • 1. Make sure the recharge battery float voltage and charge current, input voltage of the module.
  • 2. adjust constant voltage regulator, the output voltage about 5V.
  • 3. With a multimeter ( to 10A) Measuring output Short-circuit current, Also adjust the constant regulator allows Output current reaches a predetermined charge current value;
  • 4. Adjust Constant regulator allows Output voltage reaches the float voltage;
  • 5. connected to the battery, try charging.
  • (1,2,3,4 step input connect power, output do not connect battery.)

 

 

LED constant current driver Usage:

  • 1. Make sure LED current and the maximum operating voltage;
  • 2. adjust constant voltage regulator, the output voltage about 5V.
  • 3. With a multimeter ( to 10A) Measuring output Short-circuit current, Also adjust the constant regulator allows Output current reaches a predetermined LED working current value;
  • 4. Adjust Constant regulator allows Output voltage Reach LED maximum working voltage;
  • 5. Connected to the LED, test.
  • (1,2,3,4 take steps input connect power, output do not connected LED.)

Package includes:

  • 1x DC Converter