DC 7V-35V auf 1,25-25V 3A Stepdown

10,50 €
inkl. MwSt., zzgl. Versand
Auf Lager

Beschreibung

Eingang: 7V-35V
Ausgang: 1,25V-25V (per Poti regelbar)
Strom: Max. 3A (per Poti regelbar)

Eingang: 7V-35V
Ausgang: 1,25V-25V (per Poti regelbar)
Strom: Max. 3A (per Poti regelbar)

It is a LED driver buck converter, voltage range 7-35V to 1.25-30V and constant current 0-3A, suitable for solar panels, wind power generator, battery charging so on

 Feature:

  • Module Properties: non-isolated Buck constant current, constant voltage module (CC CV) charging module
  • Scope:
  • High-power constant current LED driver.
  • Battery charger (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charger, solar panels, wind generators.
  • Solar Panel, Wind generator voltage regulator, Car Power Supply.
  • Input voltage: 7-35V
  • Output voltage: 1.25-30V
  • Output Current: Max 3A ( If more than 15W, please install the heat sink, this item do not include heat sink)
  • Constant current range :0-3A (adjustable)
  • Minimum voltage pressure: 2V
  • Output power: natural cooling 15W
  • Conversion efficiency: 85% (the higher the output voltage, the higher the efficiency
  • Operating Temperature: Industrial (-40°c to +85°c) (if ambient temperature exceeds 40 °c, please lower power use, or to enhance heat dissipation)
  • Full load temperature rise: 45°c
  • No-load Current: typical 10mA (12V to 4.2V)
  • Load Regulation: ± 1%
  • Voltage Regulation: ± 0.5%
  • Current precision and temperature: Actual Testing, Temperature changes from 20 degrees To 100 degrees, Constant current value change Less than 1% (constant current value 1A)
  • Dynamic response speed: 5% 200uS
  • Potentiometer adjustment direction:Clockwise (increase),Counterclockwise (decrease)
  • Indicator LED: Charging LED Red, Full Charge LED Green
  • Output Short-circuit Protection:YES
  • Input Reverse Polarity Protection:YES
  • Output Prevent Countercurrent: YES

 

Battery Charging method:

  • 1. Make sure the recharge battery float voltage and charge current, input voltage of the module.
  • 2. adjust constant voltage regulator, the output voltage about 3V.
  • 3. With a multimeter ( to 10A) Measuring output Short-circuit current, Also adjust the constant regulator allows Output current reaches a predetermined charge current value;
  • 4. Adjust Constant regulator allows Output voltage reaches the float voltage;
  • 5. connected to the battery, try charging.
  • (1,2,3,4 step input connect power, output do not connect battery.)

LED constant current driver Usage:

  • 1. Make sure LED current and the maximum operating voltage;
  • 2. adjust constant voltage regulator, the output voltage about 3V.
  • 3. With a multimeter ( to 10A) Measuring output Short-circuit current, Also adjust the constant regulator allows Output current reaches a predetermined LED working current value;
  • 4. Adjust Constant regulator allows Output voltage Reach LED maximum working voltage;
  • 5. Connected to the LED, test.
  • (1,2,3,4 take steps input connect power, output do not connected LED.)

Package Includes:

  • 1 x DC-DC Converter